Cooper, you're just going to need the Adapter Rails for Curt 5th Wheel Hitch # C47BR. This adapter will pop into your OEM pucks and provide a mounting point for your Curt A20 5th Wheel Trailer Hitch w/ R20 Slider # C16541. view full answer...
Hey William, yeah everything you mentioned is correct. The Curt rail kit adapter part # C88KR will add 2-1/2 inches to the hitch height so there is a good likelihood that you'll need to compensate for that by changing the hitch head height and/or the height of the pin box on the trailer. view full answer...
Hey Mike, so we have hitch extenders that can be used when towing a trailer like the Malone part # MPG544 but the Roadmaster adapter you mentioned is not one that can be used when towing. With that said your trailer would need to weigh under 4,000 lbs to use this adapter and we don't have any similar options with a higher capacity. view full answer...
Hey David,
Yes, the Reese Sway-Control Bracket for 2" Ball Mounts # RP26003 would be a compatible match with the Ball Mount Adapter for Convert-A-Ball Cushioned Weight Distribution Shank # BA-1. If you need the hitch ball as well for the sway-control bracket then you can use part # RP58060 for the ball and part # 37201001 for the pin. This bracket is 3/8" thick so you'll want to check if the shank of the hitch ball is long enough to accommodate the increased thickness. view full answer...
The current versions of the Andersen Ultimate and MORryde Pin Boxes like the part # MR74VR work together without requiring any adapters. view full answer...
Yes, the Curt Spyder Goooseneck/Fifth Wheel Adapter part # 16085 does come with the needed pins to secure it to your fifth wheel rails. view full answer...
Hi Shao-pow,
Yes, we do have exactly what you need with the two parts you asked about, the SpeedKnob and Shank Adapter:
- Replacement SpeedKnob and Wedge Assembly # 8880508
- Replacement 2" Shank Adapter # 8880612 view full answer...
Hey Jeff,
Since most tow bars have to sit up 90 degrees and then turn to either side to stow you'd almost certainly need to remove a bike rack. The Roadmaster Dual Hitch Receiver Adapter # RM-077-4 you were looking at would allow you to haul both but it along with even their largest version # RM-077-10 would likely still have the bike rack block the tow bar from stowing. view full answer...
That completely depends on what style of Companion hitch you have. If your Companion hitch was made for the 2020-2024 GMC/Chevy puck system such as the # BWRVK3710, you can easily transfer it to the new Chevy 3500, provided the truck has the OEM fifth wheel puck system (not just the gooseneck).
If your companion hitch was made to be used with the B&W Turnoverball gooseneck hitch, like part # BWRVK3500-5W, it can only be used with the B&W Turnoverball hitch and it will not work with the... view full answer...
Hey Robert, so the etrailer base plate kit part # e86YR that you referenced can be used with a Blue Ox tow bar but you will need to use the adapter part # e98986 and you'd be set. view full answer...
Hi Nic,
Generally yes, for a truck bed under 8 feet long like on your 2021 Ram 2500 you do need a sliding 5th wheel hitch. That said, there are 5th wheel trailers that have a tapered nose designed to allow the use of fixed 5th wheel hitches as they won't contact the cab on right turns, so if that's the type of trailer you have, then a sliding hitch isn't needed.
With that in mind, the hitch I love for your 2021 Ram 2500 with the puck system is the Curt A20 due to its ease of use and... view full answer...
Hey John, what you need is the part # ETBC7 as this comes with everything needed to adapt your 4-way to a 7-way plus wire up a brake controller like the P2 # 90885 and activate the 12 volt charge circuit for the battery. view full answer...
Hey John, yes you could use the brake controller install kit/7-way adapter part # ETBC7 as just a 7-way adapter for the time being and not wire up any of the brake controller install wires and it would work fine till you decide to install one. The P2 part # 90885 would be a really great choice when it's time for one too by the way. view full answer...
The Replacement 2" Adapter for Swagman 1-1/4" to 2" Bike Racks # SP323 is actually not going to work with your Thule T2 Pro X Bike Rack for 2 Bikes # TH83GC, instead you'd need to use the Hitch Reducer 2" to 1-1/4" Trailer Hitch Receiver # HT02 which will work and has been approved by Thule. view full answer...
Hey Nick, to install a Demco Hijacker Autoslider fifth wheel hitch like the part # DM8550035 in the bed of your 2019 GMC Sierra Denali short bed with the OEM pucks you'd need the rail kit adapter part # DM6194 and you'd be set. view full answer...
I do see the Receiver # C13146 and 4-Way # 118628 you got from us for your 2020 Acura MDX. Depending on if you got a 7-way like our Kit # ETBC7 which includes the wiring needed for a charge line or just an Adapter # 37185 will decide what all you need to use the Curt Echo # C51180. If you only have the Adapter # 37185 you are going to need enough 10 Gauge Wire # DW02508-1(sold by foot) to run from the battery to the 7-way, Circuit Breaker # 9510, two Ring Terminals # DW05740-1 for connecting... view full answer...
Hey Terry we have a fifth wheel rail kit that fits your 1994 Chevy K1500 and your Valley fifth wheel hitch with the B and W part # BWRVK3200. Thankfully Valley made their hitches to fit the industry standard fifth wheel rails like what the B and W kit I mentioned is. view full answer...
Aside from the Demco SBS Stay-IN-Play DUO item # SM99251, to flat tow your 2024 Jeep Wrangler 4xe you will need the following parts:
Tow Bar and Safety Chains - etrailer SD Non-Binding Tow Bar item # e74ZR
Base Plate Kit - Roadmaster Direct-Connect Base Plate Kit - Removable Arms item # RM-521453-5
Wiring Harness - Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit item # RM-15267 or item # RM63MR if you have the ParkSense proximity sensors
High Low Adapter - The tow bar needs... view full answer...
Yes, the Hollywood Racks Destination bike rack part # HLY66ZR that you referenced is compatible with the Lectric XP bike racks that you have. It has the needed weight capacity and also ability to secure the bike frames without using an adapter bar. Most e-bikes are made without top tubes like your e-bike and this rack was designed to attach to it. view full answer...
Thanks for reaching out, Jon!
To replace the factory hitch on your 2002 Chevy Silverado 3500 I recommend the Draw-Tite Ultra Frame Trailer Hitch Receiver # 41944. For something a bit more heavy duty we have the Draw-Tite Trailer Hitch Receiver # DT45519, but this does with a larger 2-1/2" hitch receiver so it may not work with your current inventory of hitch accessories without an adapter like our Magnetic Reducer Sleeve # e28JR.
For the wiring there are 2 possible replacement options... view full answer...